SequelSEC

CORE MOLDING TECHNOLOGIES INC CMT

Plastics Products, NEC · CIK 0001026655 · Fiscal year ends 1231

AnnualQuarterlyTTM
Revenue
$62.73M
Fiscal year ended 2026-06-30
Operating income
$2.30M
Fiscal year ended 2026-06-30
Free cash flow
$8.00M
Fiscal year ended 2026-06-30

Valuation, from the filing

Public float$103.00MMarket value of stock held by non-affiliates, as stated on the cover page for 2025-06-30
Float per share$11.66Float divided by shares outstanding in the same filing. A floor under the share price on that date, not the price itself.
Float / net income9.2×A lower bound on the multiple, because affiliate holdings are excluded.
Float / revenue0.4×A lower bound on the multiple, because affiliate holdings are excluded.
Float / equity0.7×A lower bound on the multiple, because affiliate holdings are excluded.

Every figure here is drawn from the 10-K cover page and the statements behind it, so each one traces to a filing. Public float counts only stock held by non-affiliates, which makes these floors rather than estimates: a high multiple is conclusive, a low one may mean cheap or may mean closely held. The float was measured on 2025-06-30, not today, and each multiple below it uses the figures for the fiscal year ending 2025-12-31 — the year that filing covered.

Valuation over time

9.2× earnings today, against a median of 8.1× across 8 years on record. Above its own history.

Float measuredPublic floatFloat / net income
2025-06-30$103.00M9.2×
2024-06-30$97.00M7.3×
2023-06-30$138.32M6.8×
2022-06-30$60.83M5.0×
2021-06-30$90.56M19.4×
2020-06-30$22.06M2.7×
2017-06-30$102.08M18.7×
2016-06-30$66.56M9.0×

Each float is paired with the fiscal year the filing that stated it covers. Only years where the company reported positive net income appear, because a multiple against a loss is not a multiple.

How this compares in its industry

Percentile among the Plastics Products, NEC filers on this site, highest value first. A high percentile means a large figure, which is good for a margin and not for leverage — the ranking says where the company sits, not whether that is where it should be.

MeasureReportedPercentile
Long-term debt / equity0.11x0th
FCF margin0.7%0th
Gross margin17.4%0th
R&D / revenue0.5%0th
Revenue YoY growth-9.5%0th
Current ratio3.02x88th
Effective tax rate23.7%83th
Operating margin5.2%25th
SBC / revenue0.7%25th
Net margin4.1%38th
CapEx / revenue6.3%60th

CORE MOLDING TECHNOLOGIES INC (CMT) reported revenue of $62.73M and net income of $1.78M for the fiscal year ended 2026-06-30. This page shows 10 annual periods of income statement, balance sheet and cash flow figures normalized from CORE MOLDING TECHNOLOGIES INC’s SEC filings, each linked to the filing it came from. It is classified by the SEC under Plastics Products, NEC.

Income

CORE MOLDING TECHNOLOGIES INC income by fiscal year, in US dollars, normalized from SEC filings.
Metric2026-06-302026-03-312025-12-312025-09-302025-06-302025-03-312024-12-312024-09-302024-06-302024-03-31
Revenue$62.73M$58.58M$74.68M$58.44M$79.24M$61.45M$62.50M$72.99M$88.74M$78.14M
Cost of revenue$50.00M$46.60M$63.34M$48.29M$64.92M$49.66M$52.61M$60.65M$71.02M$64.84M
Gross profit$12.73M$11.98M$11.34M$10.14M$14.31M$11.78M$9.88M$12.34M$17.72M$13.30M
Operating income$2.30M$764.00K$3.59M$2.57M$5.21M$2.84M$869.00K$3.60M$7.49M$4.73M
Net income$1.78M$605.00K$3.08M$1.88M$4.05M$2.18M-$39.00K$3.16M$6.42M$3.76M
Research & developmentUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
Weighted-average diluted sharesshares 8.71Mshares 8.77MUnavailableshares 8.69Mshares 8.62Mshares 8.82MUnavailableshares 8.79Mshares 8.77Mshares 8.83M
Pretax income$2.35M$795.00K$3.72M$2.66M$5.36M$2.93M$1.14M$3.89M$7.66M$4.79M
Income tax expense$569.00K$190.00K$642.00K$779.00K$1.31M$750.00K$1.18M$727.00K$1.25M$1.03M
Diluted EPS$0.21$0.07$0.36$0.22$0.47$0.25$0.00$0.36$0.73$0.43
Selling, general & administrative$10.43M$11.21M$7.75M$7.57M$9.10M$8.94M$9.02M$8.74M$10.24M$8.57M
General & administrativeUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
Selling & marketingUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable

Balance

CORE MOLDING TECHNOLOGIES INC balance by fiscal year, in US dollars, normalized from SEC filings.
Metric2026-06-302026-03-312025-12-312025-09-302025-06-302025-03-312024-12-312024-09-302024-06-302024-03-31
Cash & equivalents$12.13M$23.51M$38.06M$42.40M$43.21M$44.47M$41.80M$42.35M$37.79M$26.62M
Total assets$227.42M$242.35M$228.13M$219.69M$219.92M$223.59M$209.55M$220.65M$225.70M$212.27M
Current assets$96.30M$117.07M$103.33M$111.51M$113.19M$115.61M$102.89M$115.50M$118.70M$103.24M
Total liabilities$66.34M$84.13M$69.96M$64.26M$66.46M$73.72M$62.19M$72.81M$78.19M$69.45M
Current liabilities$48.24M$48.50M$34.17M$38.39M$39.68M$46.29M$36.71M$47.88M$52.03M$42.22M
Total equity incl. NCI$161.08M$158.22M$158.17M$155.43M$153.46M$149.87M$147.36M$147.84M$147.50M$142.82M
Temporary (mezzanine) equityUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
Inventory$27.34M$22.43M$19.72M$19.80M$19.36M$19.30M$18.35M$20.69M$21.76M$23.86M
Accounts receivable$35.29M$53.49M$30.83M$34.88M$37.79M$36.74M$30.12M$36.78M$46.99M$40.08M
Goodwill$17.38M$17.38M$17.38M$17.38M$17.38M$17.38M$17.38M$17.38M$17.38M$17.38M
Long-term debt$0$17.04M$17.64M$18.24M$18.80M$19.25M$19.71M$20.16M$20.60M$21.06M
Accounts payable$23.81M$17.70M$14.92M$20.73M$22.63M$28.29M$17.12M$25.01M$29.46M$24.26M

Cash flow

CORE MOLDING TECHNOLOGIES INC cash flow by fiscal year, in US dollars, normalized from SEC filings.
Metric2026-06-302026-03-312025-12-312025-09-302025-06-302025-03-312024-12-312024-09-302024-06-302024-03-31
Operating cash flow$16.30M-$9.23M$5.02M$4.57M$3.50M$6.10M$4.99M$9.22M$15.87M$5.07M
Capital expenditures$8.30M$3.78M$7.96M$4.92M$2.62M$1.77M$4.48M$2.24M$2.91M$1.89M
Investing cash flow-$8.30M-$3.78M-$7.96M-$4.92M-$2.62M-$1.77M-$4.48M-$2.24M-$2.91M-$1.89M
Financing cash flow-$19.37M-$1.54M-$1.40M-$469.00K-$2.14M-$1.66M-$1.05M-$2.42M-$1.79M-$665.00K
Net change in cash-$11.37M-$14.55M-$4.34M-$815.00K-$1.26M$2.67M-$545.00K$4.56M$11.17M$2.51M
Stock-based compensation$501.00K$495.00K$142.00K$521.00K$494.00K$631.00K$428.00K$562.00K$766.00K$739.00K
Common dividends paidUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
Common share repurchases$155.00K$457.00K$2.57M$0-$316.00K$916.00K$1.50M$21.00K$1.42M$0
Depreciation & amortization$3.17M$3.06M$2.84M$3.11M$3.18M$3.21M$3.38M$3.29M$3.44M$3.29M

Derived

CORE MOLDING TECHNOLOGIES INC derived by fiscal year, in US dollars, normalized from SEC filings.
Metric2026-06-302026-03-312025-12-312025-09-302025-06-302025-03-312024-12-312024-09-302024-06-302024-03-31
Free cash flow$8.00M-$13.01M-$2.94M-$346.00K$880.00K$4.33M$509.00K$6.98M$12.96M$3.18M
Gross margin20.3%20.4%15.2%17.4%18.1%19.2%15.8%16.9%20.0%17.0%
Operating margin3.7%1.3%4.8%4.4%6.6%4.6%1.4%4.9%8.4%6.1%
FCF margin12.8%-22.2%-3.9%-0.6%1.1%7.0%0.8%9.6%14.6%4.1%
SBC / revenue0.8%0.8%0.2%Unavailable0.6%1.0%0.7%UnavailableUnavailableUnavailable
Current ratio2.00x2.41x3.02x2.90x2.85x2.50x2.80x2.41x2.28x2.45x
Revenue YoY growth-20.8%-4.7%19.5%-19.9%-10.7%-21.4%-15.3%-15.8%-9.2%-21.5%
Net margin2.8%1.0%4.1%3.2%5.1%3.6%-0.1%4.3%7.2%4.8%
R&D / revenueUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
CapEx / revenue13.2%6.5%10.7%Unavailable3.3%2.9%7.2%UnavailableUnavailableUnavailable
Long-term debt / equity0.00xUnavailable0.11x0.12xUnavailableUnavailableUnavailableUnavailableUnavailableUnavailable
Effective tax rate24.2%23.9%17.2%29.3%24.4%25.6%103.4%18.7%16.3%21.5%

Amounts are abbreviated; the exact reported value is carried in each cell. — means unavailable, not zero. Open CMT in the interactive workspace to inspect any figure back to its filing.

Source filings

10-Q · Filed 2026-08-04View SEC filing
10-Q · Filed 2026-05-07View SEC filing
10-K · Filed 2026-03-10View SEC filing
10-Q · Filed 2025-11-04View SEC filing
10-Q · Filed 2025-08-05View SEC filing
10-Q · Filed 2025-05-08View SEC filing

Companies in the same industry

Every accounting identity this site checks — the balance sheet, the gross profit bridge and the cash flow statement — reconciles in every period shown.